Rubber expert Li Xiuquan studio
Rubber technology consulting Online
Contact Us

Contact person: Li Xiuquan (Engineer)

Tel:+86 13811448637

Q Q:314652585

E-mail:13811448637@163.com

The line: 622202020003040788

Address: Beijing city Dongcheng District Jianwai SOHO


Design of rubber materials and products

Rubber material:

天然胶乳、丁腈胶乳、氯丁胶乳、天然胶(NR)、异戊二烯橡胶(IR)、顺丁胶(BR)、丁苯橡胶(SBR)、丁腈橡胶(NBR)、氢化丁腈橡胶(HNBR)、氯丁橡胶(CR)、丁基橡胶(IIR)、氯化丁基橡胶(CIIR)、溴化丁基橡胶(BIIR)、二元乙丙橡胶(EPM)、三元乙丙橡胶(EPDM)、聚硫橡胶、丙烯酸酯橡胶(ACM)、聚氯乙烯橡胶(CM)、甲基乙烯基硅胶、室温硫化硅胶、氟橡胶、聚四氟乙烯、聚醚橡胶、氯醇橡胶、全氟醚、PVC、热塑性弹性体TPR\TPV\TPE;

Natural rubber latex, nitrile rubber, neoprene latex, natural rubber (NR), isoprene rubber (IR), polybutadiene rubber (BR), styrene butadiene rubber (SBR), nitrile butadiene rubber (NBR), hydrogenated nitrile rubber (HNBR), chloroprene rubber (CR), Ding Ji (IIR), chlorinated rubber glue (Ding Jixiang CIIR), brominated Ding Ji rubber (BIIR), ethylene propylene rubber (EPM) was two yuan, three yuan of ethylene propylene rubber (EPDM), polysulfide rubber, acrylic rubber (ACM), PVC and rubber (CM), methyl vinyl silicone rubber, RTV silicone, fluorine rubber, PTFE, polyether rubber, chlorohydrin rubber, perfluoro ether, PVC, TPR\TPV\TPE thermoplastic elastomer;

胶黏剂、涂料:氯丁胶、SBS、环氧树脂、聚氨酯、丙烯酸等。

Adhesive, coating: neoprene adhesive, SBS, epoxy resin, polyurethane, acrylic etc..

制品配方:

Product formulation:

轮胎、输送带、三角带、热压敏胶、橡皮布、橡胶梭轮、力车实心胎、橡皮筋、橡胶亮油和消光油(雨鞋用)、喷涂速凝橡胶沥青防水涂料、胶辊、胶板、中空玻璃密封胶、橡胶运动跑道(聚氨酯喷涂和预制型)、胶粉板、橡塑地板、防水卷材、遇水膨胀和遇油膨胀胶圈、汽车和门窗密封条(发泡、阻燃、实条)、密封件(油封和O型圈)、沟槽管件密封圈、橡胶坝、橡胶运输带、橡胶胶管、橡胶雨鞋、橡胶软连接、橡胶减震、橡胶地砖、止水带、乳胶手套等。

Tire, conveyor belt, V-belt, thermal pressure sensitive adhesive, rubber blanket, shuttle wheel, vehicle solid tire, rubber band, rubber oil (light oil and extinction boots with), sprayed quick setting rubber asphalt waterproof coating, rubber roller, rubber plate, insulating glass sealant, rubber sports track (polyurethane spraying and preform), rubber plate, rubber flooring, waterproofing membrane, water swelling and oil swelling rubber ring, car doors and windows sealing strip (foam, flame retardant, a seal (seal), and the O shaped ring), pipe trench seals, rubber dam, rubber conveyor belt, rubber hose, rubber boots, rubber the soft connection, rubber, rubber floor tiles, sealing strip, latex gloves.



Design principle of formulation

1, ensure the technical performance of vulcanized rubber is specified, the product quality;

2、 在胶料和产品制造过程中加工工艺性能良好,使产品达到高产;

2, the processing in the rubber material and product manufacturing process performance is good, so that products meet the high yield;

3、 所用的生胶、聚合物和各种原材料容易得到;

3, the use of rubber, polymers and various raw materials easy to get;

4、 劳动生产率高,在加工制造过程中能耗少;

4, labor productivity is high, in the manufacturing process, less energy consumption;

5、 符合环境保护及卫生要求;

5, in line with environmental protection and hygiene requirements;

6、 在不降低质量的情况下,降低胶料的成本;

6, without reducing quality, reduce sizing cost;

7、 在不提高胶料成本的情况下,提高产品质量。要使橡胶制品的性能、成本和加工工艺可行性三方面取得最佳的综合平衡。用最少物质消耗、最短时间、最小工作量,通过科学的配方设计方法,掌握原材料配合的内在规律,设计出实用配方。

In 7, does not improve the sizing cost, improve the quality of the products. To achieve the comprehensive balance the best performance, cost and process feasibility of rubber products three. With a minimum of material consumption, the shortest time, minimum amount of work, through the scientific method of formulation design, grasp the inherent laws of raw material mix, design a practical formula.